ECE 5320 / 6322 Lab Website
Unfortunately, we will not be able to get all of the parts working to
demonstrate the full ECE5322/6320 system before the end of the semester. There are of course a whole series of problems
contributing to this, mostly a lack of engineer time. So, we will not be
"doing" labs 7,8. Lab 6 will be our last lab, so if you are
already finished with this lab, please turn in your work to your TA's homework
return locker. This lab is due one week
after you did the lab (ie. this week). There is no formal final report required, either (please, please, no tears about this
one). Bryan and I will be finishing the
lab testing after the semester is finished.
If you would like to join us, and test out your full circuit, please
email me, and I will email you when we have all parts working.I
am sorry we ran into this snag. Never
underestimate the pain of delays in engineering projects! CFurse
Fall 2006
|
|
|
Which Lab are
we Doing this week? |
|
|
|
5320-1 |
Microwave Engineering I Labs: Section 2 Section 3 Section 4 Section 5 |
MWF W T M F |
|
EMCB 120 111 grader MEB 2275 MEB 2275 MEB 2275 MEB 2275
|
C. Furse
|
Microwave Lab
Location: MEB 2555
|
Week |
M |
T |
W |
H |
F |
|
Aug 24 |
|
|
|
|
|
|
Aug 28 |
|
|
|
|
|
|
Sept 4 |
break |
|
|
|
|
|
Sept 11 |
|
|
|
|
|
|
Sept 18 |
|
|
|
|
|
|
Sept 25 |
1 |
1 |
1 |
1 |
1 |
|
Oct 2 |
|
|
|
break |
break |
|
Oct 9 |
2 |
2 |
2 |
2 |
2 |
|
Oct 16 |
|
|
|
|
|
|
Oct 23 |
3 |
3 |
3 |
3 |
3 |
|
Oct 30 |
4 |
4 |
4 |
4 |
4 |
|
Nov 6 |
|
|
|
5 |
5 |
|
Nov 13 |
5 |
5 |
5 |
6 |
6 |
|
Nov 20 |
6 |
6 |
6 |
break |
break |
|
Nov 27 |
7 |
7 |
7 |
7 |
7 |
|
Dec 4 |
8 |
8 |
8 |
8 |
8 |
Wireless Local Area Network Design Project
These labs are provided for use by students taking Microwave Engineering at the University of Utah. If you would like to use them for another purpose, please contact the professor.
Sample Final Report Introduction (based on Overview of Labs below)
Lab 1
-- Intro to Hardware and Software
Lab1 Lab (no prelab): (Word)
(PDF)
Network
Analyzer Calibration Tutorial
Lab
2 – Antenna and Matching
Lab2 Lab (no prelab): (Word)
(PDF)
Lab 3 –
Couplers
Lab 3 Lab (including prelab): (Word) (PDF)
Network
Analyzer Calibration Tutorial
Lab 4 - Coupled line BP Filters
Lab4 lab (including prelab): (Word)
(PDF)
Lab 5 - Diode Detector
Lab 5 Lab (including prelab, do prelab during your
first week lab) (Word) (PDF)
Application note: Impedance
Matching for Detectors (HP App Note 963)
ADS
Tutorial on Diode Detectors
Diode.txt (S
parameters)
Lab 6 - Amplifier
Lab 6 Lab (including prelab reading) (WORD)
(PDF)
Sample
Design (2.4/2.6 GHz and inductor, use this as an example)
Reference reading: RF and Microwave power
amplifiers
Lab 7
- Series connection
Lab 8 - Connection to PC
|
Prelab |
Due at start of lab |
Bring to Lab with you |
Do this in your notebook. Copy your notebook and turn in the COPY. Some of these designs are done as portfolio homework. Turn in a copy BOTH for the portfolio and for the lab. |
|
Lab
Notebook/Results |
Due at the start of lab the next time YOU go to lab. |
Bring to lab with you OR leave it in your TA’s homework locker by the ECE office |
Do this in your notebook. Copy your notebook and turn in the COPY. Each STUDENT should turn in a separate notebook copy. |