ECE 2210/00
Electrical Engineering for Nonmajors / Civil
Lab Assignments

No labs before the first class

MEB 2265

Bring notebook, breadboard and parts to all labs, including the first.
(See bottom of page for more details.)

 
Lab  Title


 
 Lab Notebook
1  Introduction    Labs don't start before the first class lecture
2  DC Circuits
3  Thevevin & Superposition
4  Scope
5  Capacitors  
6  Resonance  (last lab for ECE 2200)
7  Phases and Filters
Lecture  Lecture replaces lab. 
 Lecture rooms:
      Tue 12:25 MEB
      Wed 3:05 WEB
      Fri    9:00 MEB
8  Transients & Appendix
9  Control Systems & Calculations
10  AC Meters & Transformer
Lecture  Lecture replaces lab.
 Lecture rooms:
      Tue 12:25 MEB
      Wed 3:05 WEB
      Fri    9:00 MEB 
11  Diodes and Transistors & Servo schematic
12  Operational Amplifiers





Lab Sessions & TAs 
Day and time Section Instructor (Click name to send email)



 T, 10:45 - 1:45 pm  2210-004
  Bavithra Esaiselvan Malathy   
 T, 2:00 - 5:00 pm
 2210-006   Sayali Tope      
 T, 3:05 - 6:05 pm  2210-008
  Fatemeh Koohestanmahalian  
 W, 3:05 - 6:05 pm  2210-005   Nazmul Hasan     
 Th, 7:30 - 10:30 am  2210-007
  Nazmul Hasan     
 Th, 10:45 - 1:45 pm  2200-002
  Bavithra Esaiselvan Malathy  
 Th, 3:05 - 6:05 pm  2210-002   Sayali Tope 
 F, 11:50 - 2:50 pm  2200-003
  Bavithra Esaiselvan Malathy  
 F, 3:05 - 6:05 pm  2210-003   Nazmul Hasan   

TAs:  

     Bavithra Esaiselvan Malathy 
      "Bavithra Esaiselvan Malathy" <bavithraem91@gmail.com>
      (571) 420-0101
      Office hours: Friday, 10 AM to 12 PM  TA room (MEB 2340, just across from parts supply room)

  
Sayali Tope    
       
"Sayali Tope" <sayali.tope@gmail.com>
        (801) 739-2179
        Office hours: Monday and Tuesday - 5 pm to 6 pm - room 3336, Wednesday - 9.30 am to 10.30 am - Lab 2265

    Nazmul Hasan   
       
"Nazmul Hasan" <nazmulhasan772@gmail.com>
        (385) 207-6832
        Office hours:  Monday 2.30-5.30pm  SMBB 3800  (New building east of WEB)

    Fatemeh Koohestanmahalian   
        "Fatemeh K" <u0942357@utah.edu>
        (323) 861-9621
        Office hours:  Tuesday 10:45-1:45 in lab or TA room (MEB 2340, just across from parts supply room)


Notebook:
You will need a lab notebook for all the labs, including the first.  Select a notebook to which you cannot add pages and which isn't much larger than a standard sheet of paper.

Lab Breadboard and Parts:
You will need a breadboard and wires for all the labs, including the first.  It’s $10.50 at the ECE stockroom.  Bring your own if you have one.  All the other parts needed will total about $5 for ECE 2200 and $8 for ECE 2210.  You may work with one lab partner in the lab and share the same parts.  You may also work out a parts sharing arrangement with someone in a different lab section than your own.

You will need to have money on your U-card to buy these parts at the ECE stockroom.  You can add money to your U-card at the Union building either at the U-card office or at a machine near the pool tables that takes cash.  You can also add money on line at ucardadmin-sp.blackboard.com/eaccounts by signing on to your account or as a guest.

Keep all your parts together in a zip-bag or small box to make your own “ECE 2210 kit” because many parts are used again in later labs.  If you don’t want your kit at the end of the semester, I’ll help you sell it to a student next semester.

Notes:
ECE 2210 and 2200 are NOT web-based classes.  The material available here is NOT a substitute for attending class and is NOT necessarily up-to-date or exactly reflective of what is given in class or is in the required class copy packet.  Please do not use it in that way.  This material is merely an extra resource for an ATTENDANCE-based class.  If you want a web-based class, they are available elsewhere.

Much of this course material is presented in PDF, for which you will need a reader.
Readers for most platforms can be downloaded for free, examples: Adobe Acrobat and Ghostscript, Ghostview and GSview.   Choose the Adobe Acrobat if you just want to read.  Choose Ghostscript, Ghostview and GSview if you want to create PDF files of your own.

To view and print PDF files more reliably:
Save the file on your computer (right click on link), then open and/or print the local file only.
I
arnstolp@ece.utah.edu  (Arn rarely reads his email)